Compressed Gas Regulators

GASCO offers a wide selection of Regulators, ranging from our cost effective Control Valve (CV-2) to our highest quality Stainless Steel Regulators (70/SS) for Highly Reactive Gas Mixtures. These Regulators complement our large selection of Cylinders.

PART NUMBER	CV-2
VALVE INLET	CGA 600
FITS CYLINDER	34LS, 17L
FLOW RATE	N/A
GAUGE PSI	N/A
MATERIAL	BRASS

PART NUMBER	72-MFV/17
VALVE INLET	CGA 600
FITS CYLINDER	34LS, 17L
FLOW RATE	0.2 - 1.5 LPM ADJUSTABLE
GAUGE PSI	N/A
MATERIAL	BRASS

This valve/flow meter is used with 17 & 34 Liter Steel Cylinders. It offers a low cost and convenient method of gas flow regulation between 0.5 to 1.51 LPM.

PART NUMBER	70-FMV
VALVE INLET	C-10
FITS CYLINDER	103L, 74L, 58L, 34L
FLOW RATE	FLOW MATCHING
GAUGE PSI	N/A
MATERIAL	BRASS

This cost effective valve provides fine adjustment of the gas flow to meet the demand rate of Pump Assisted Gas Monitors. It attaches directly to 34, 58 and 74 Liter Aluminum Cylinders as well as 103 Liter Steel Cylinders.

PART NUMBER	74-DAF
VALVE INLET	C-10
FITS CYLINDER	34L, 44L, 58L, 66L, 74L, 103L, 116L
FLOW RATE	0.3 - 3LPM SELECTABLE
GAUGE PSI	1200 PSI
MATERIAL	BRASS, NICKEL PLATED

This regulator is used with 34, 58 and 74 Liter Aluminum Cylinders as well as 103 Liter Steel Cylinders. Highly versatile with nine flow settings it's easily adjustable by clicking from one flow setting to another.

PART NUMBER	71-*
VALVE INLET	CGA 600
FITS CYLINDER	34LS, 17L
FLOW RATE	0.1 - 6 LPM FIXED
GAUGE PSI	500 PSI
MATERIAL	BRASS, NICKEL PLATED

Completely Nickel Plated, this regulators is used with 17 & 34 Liter Steel Cylinders. They offer a on/off "push button".
* Suffix delineates the desired flow rate

PART NUMBER	70/SS-*
VALVE INLET	C-10
FITS CYLINDER	103L, 74L, 58L, 34L
FLOW RATE	0.1 - 6 LPM FIXED
GAUGE PSI	1200 PSI
MATERIAL	STAINLESS STEEL

Our highest quality regulator is used with 34, 58 and 74 Liter Aluminum Cylinders. Constructed of stainless steel and recommended for use with reactive gases such as Chlorine, Hydrogen Chloride and Ammonia.
* Suffix delineates the desired flow rate

PART NUMBER	73-PBR*
VALVE INLET	C-10
FITS CYLINDER	103L, 74L, 58L, 34L
FLOW RATE	0.1 - 6 LPM FIXED
GAUGE PSI	1200 PSI
MATERIAL	BRASS, NICKEL PLATED

The same as our 70 Series, this regulator is used with 34, 58 and 74 Liter Aluminum Cylinders as well as 103 Liter Steel Cylinders. They offer a on/off "push button" as opposed to the "turn knob" of the 70 SERIES REGULATOR.
* Suffix delineates the desired flow rate

PART NUMBER	70-*
VALVE INLET	C-10
FITS CYLINDER	103L, 74L, 58L, 34L
FLOW RATE	0.1 - 6 LPM FIXED
GAUGE PSI	1200 PSI
MATERIAL	BRASS, NICKEL PLATED

Our most popular regulator is used with 34, 58 and 74 Liter Aluminum Cylinders as well as 103 Liter Steel Cylinders. Completely Nickel Plated, this high quality regulator is cost effective and a convenient method of gas flow regulation.
* Suffix delineates the desired flow rate

	PART NUMBER	75-DFR
	VALVE INLET	C-10 OR CGA 600
	FITS CYLINDER	34L, 44L, 58L, 66L, 74L, 103L, 116L
	FLOW RATE	ON DEMAND
	GAUGE PSI	1200 PSI
	MATERIAL	BRASS, NICKEL PLATED BRASS